HomeProductsApplicationsCompanyContact DE / EN

IX-200

Highlights
Open Linux System

Freely programmable and configurable

Up to 5 RS232 interfaces

Fanless, power consumption < 1.5 Watt

DC input 10..40 volts

Ext.Temp. -40°C .. +85°C available

Lade Menü...
Lade Menü...

IX-200

The IX-200 Embedded Computer is a powerful and industry-capable system for versatile tasks in the field of M2M communication, IoT connection, automation, control, measurement and monitoring technology.

Industrial interface equipment
The IX-200 Embedded Computer System supports a 10/100 Mbit Ethernet interface, up to 5 serial RS232 interfaces as well as a USB host and a USB device interface. The low-power ARM system is equipped with 16 MB of internal flash memory and 64 MB of RAM. A removable SD memory card is available for standard SD and SDHC memory cards.

Modern and open Linux system
The IX-200 Embedded Computer comes with a modern, ready-to-run Linux system. The open Linux system is freely programmable and configurable. The processing time is very short, applications can be realized quickly, simply and cost-effectively.

Power supply with wide range input
The power supply can be supplied with DC voltages between 10 and 40 volts. The supply input is reverse polarity protected and protected against overvoltages.

Flexible assembly possibilities
Various mounting options are available for the IX-200 system. Two mounting brackets are available for DINrail mounting, which enable a vertical as well as a horizontal mounting. This allows the respective installation situation to be optimally met.

Specification IX-200

ProzessorARM-160MHz
Flash16 MB onboard
Main memory64 MB
Mass storageSDHC/SD-Card
Network1 x 10/100 BaseT Ethernet interface
RJ45 socket with integrated LED's
Auto-MDI(X) for automatic cable detection
Autonegotiation
Isolation: Vrms 1500 V
USB Host1 x USB host 2.0 full speed
USB Device1 x USB device 2.0 full speed
RS232up to 4 x RS232 for free use
Signals: RxD, TxD, CTS, RTS, GND
Flow control: hardware RTS/CTS, software Xon/Xoff, none
Interface for universal use

1 x RS232
Signals: RxD, TxD, GND
Interface is normally used for terminal operation

ESD Protection: ± 15kV ESD Protection Human Body Model
1 x RS232
Signals: RxD, TxD, CTS, RTS, GND
Flow control: hardware RTS/CTS, software Xon/Xoff, none
Interface for universal use
 
RTC Battery-buffered RTC for permanent availability of time and date
Status LEDs 1 x Power on, 1 x System activity, 1 x microSD access, user-programmable LED
Power supplyWide-range DC input 10..40 volts with polarity protection
Industrial connector
CaseSturdy aluminum case
Various mounting options
Mounting optionsVertical DINrail bracket
Horizontal DINrail bracket

Datasheets

Powercontrol

With the option PowerControl, the plug for the power supply has a three-pole design. Two poles remain unchanged for the power supply of the device. The third pole is a status line which e.g. can be connected directly to the ignition terminal, the terminal 15. The device switches on only when the ignition is switched on. If the ignition is switched off, this is signaled to the operating system, which in turn signals the switch-off request to the application. The application can then perform all necessary work, such as closing files, terminating programs and services etc., and then, if necessary, shut down the operating system and shut down the computer.

Extended operating temperature

With the "Extended operating temperature" option, the IX-200 can be operated in the following temperature ranges.

-30°C .. +80°C (non-condensing) Operation without restrictions
-40°C .. +85°C (non-condensing) Restricted operation

Restricted operation affects the integrated 4G module. Restricted operation allows the module to operate normally, but it may be possible that 3GPP specifications are not fully respected with respect to the receiver's sensitivity.

Bracket

The bracket option is used to attach the IX-200 Industrial Embedded Computer to a flat surface. This ensures a stable and easy mounting of the IX-200.

Bracket with rubber buffer

If a fixed mounting of the IX-200 Industrial Embedded Computer is not possible due to vibrations and impacts, the holder is available with integrated rubber buffers. This can reliably shield vibrations and impacts from the device.

DINrail holder horizontal

The horizontal DINrail option allows the IX-200 Industrial Embedded Computer to be attached to a standard DINrail. The horizontal mounting variant is selected if the space available to the front is limited.

DINrail holder vertical

The vertical DINrail holder allows the IX-200 Industrial Embedded Computer to be attached to a standard DINrail. The vertical mounting option is selected when the space is limited on the side.
We use cookies for the optimal design and the continuous improvement of this website. By continuing to use the website, you agree to the use of cookies. You will receive further information about cookies in our Privacy Notice.x
We use cookies for the optimal design and the continuous improvement of this website. By continuing to use the website, you agree to the use of cookies. You will receive further information about cookies in our Privacy Notice.x